Wire Organizer


On Friday, Leif and I made a simple box for organizing the wires in the electronics cabinet! First we created a simple open top box from plywood with dimensions to fit the shelf. We used the Biscuit Jointer to have edges without nail or screw holes. After gluing up the box, we cut down 6 small pieces to create an interior slot that would hold up a pipe. We strung the wire spools onto the pipe and drilled small holes into the front of the box for wires to thread through. Finally we gave it a quick sanding and finished it off with some danish oil.

No more tangled wires in the VFL!







Projects at the VFLEden Lew